The full-automatic PVC veneer production line divides the pasted plates and uses small pieces made into fixed-length plates according to user's requirements. First, the plates are put into the conveying table, then the plates are cut for the first time, then fed into the conveying table for the second time through the conveying table for cutting, and then the plates are cut out for forming.
Fully automatic PVC panel production line, what are the production characteristics?
The board produced by the full-automatic PVC veneer production line has the characteristics of fireproof, waterproof, environmental protection, sound insulation, energy saving, elegant appearance, no deformation, high strength, wear resistance, long life and the like, and the decorative effect can reach high-end standards. PVC plaster veneer can be cut, planed, nailed and glued according to actual needs. Advanced technology, widely used in hotels, restaurants, shopping malls, theaters, dance halls, stations, auditoriums, offices, living room office buildings, electronic computer rooms, precision instrument rooms and factory or residential interior decoration.
The full-automatic PVC panel production line has large, medium and small equipment. The company implements one-stop service of technology and equipment installation. The equipment is excellent, the technology is exquisite, and the management standard is advanced.
Automatic PVC panel production line: with automatic gluing, automatic veneer, automatic drying, speed adjustable and other devices, the machine is suitable for gypsum board, glass magnesium board, plywood, plywood, particleboard, density board, fireproof board and other surface treatment, can be pasted with PVC film, aluminum foil, wood grain paper, Boeing film and other materials.
The full-automatic PVC veneer production line divides the pasted plates and uses small pieces made into fixed-length plates according to user's requirements. First, the plates are put into the conveying table, then the plates are cut for the first time, then fed into the conveying table for the second time through the conveying table for cutting, and then the plates are cut out for forming. Pulse dust removal system can be equipped according to user's requirements. PVC veneer veneer slitting machine has.
Analysis of Possible Faults of Fully Automatic Laminating Machine
The surface of the coated workpiece is folded and not smooth or the corners cannot be wrapped: the film is not straightened, the film quality is not good, the workpiece is not polished well, too much glue is sprayed, and the template under the workpiece is too low.
The film absorption of the laminating machine is not in place: the vacuum degree is not enough, the air leakage, the temperature is not enough, the film is too thin, the workpiece is pasted with other materials, the concave depth of the workpiece exceeds the pull-up of the film, the suction-covering time is too short, the film is not pulled-up, and the distance of the workpiece is too close.
The working vacuum degree cannot be increased: the air circuit is blocked, the hand valve or solenoid valve is not closed, the vacuum pump motor belt is loose, and the vacuum gauge is damaged.
The membrane is pulled up downward when it is not sucked: whether the solenoid valve or hand valve is open. Inaccurate temperature measurement: whether the thermocouple and temperature controller are installed incorrectly or damaged;
The full-automatic laminating machine does not start: the input wire is blocked, the power cord is connected in reverse, and the voltage is not enough.
Suction phenomenon: the temperature is too high, the heating time is too long, the film quality is not good, and there is no heating.
The application of full-automatic laminating machine is relatively wide. Whether it is packaging or printing, the post-press processing of products requires the help of laminating machines. When the laminating machine is working, it is inevitable to encounter some failures, but the problems must be discovered in time so that the operator can discover and maintain in time.
Scope of application of full-automatic PVC panel packaging machine:
Sticker production line is specially designed for pvc decorative paper and paint paper on the upper surface of flat plates (such as density board, particleboard, iron board, gypsum board, marble board, etc.). It has the characteristics of flat veneer, no starting, no wrinkling and high efficiency.
The paper sticker machine (laminating machine) is suitable for pasting various colors of wood grain paper, paint-free paper, aluminum foil paper, etc. on the surface of various MDF, MDF, and fireproof boards. This machine automatically glue, baking, veneer, cold pressing, hot pressing, cutting continuous operation, with high degree of automation, veneer effect is good, no need to use other equipment pressurization, is veneer gypsum board factory, decorative materials company board decorative surface film ideal equipment.
Main features of full-automatic PVC veneer packaging machine:
1. This machine integrates automatic gluing, paper feeding, dust removal, gluing, stickers, hot pressing and film sticking.
2. Separately indicate that the dust removal system is equipped with a corresponding vacuum cleaner, so that the application shows that there is no defect.
3. Each independent stand-alone machine has an emergency switch to avoid accidents.
4. The use of air pressure molding can make the surface force controllable, completely eliminating the old paper sticking machine using spring to make the single pressure.
5. The frequency conversion speed regulation is equipped with a high-power motor to make the overall speed of the machine consistent, and the spacing between each plate is consistent when working.
6. The over-clutch device is used for gluing, indicating that the gluing is more uniform.
7. Cold pressing and hot pressing can be used immediately after the plate is formed without glue.
Technical parameters:
Workpiece size: 1220 × 2440mm
Operating voltage: 380V/50HZ
Transmission speed: 0-25m/min
Large width of workpiece z: 1300mm
Power: 18kw
Body size: 12000*1950*1700mm
Machine weight: 2800kg
FAQ:
Q1:Are you trading company or manufacturer ?
A1:We are a professional gypsum board producing line manufacturer for more than 12 years.
Q2:How long is the warranty of your equipment?
A2:1year
Q3:How long is your delivery time?
A3:Generally it is 5-10 days if the goods are in stock. or it is 15- 20 days if the goods are not in stock, it is according to quantity.
Q4:What is your terms of payment ?
A4:We can accept L/C or T/T. Payment< =1000USD, 100% in advance. Payment> =1000USD, 30% T/T in advance,balance before shippment.
Q5:Do you supply spare parts?
A5:Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q6:How will you provide installation &commissioning ?
A6:Arrange practised techicians installing and training oversea as soon as you receive the machines .
Q7: Do you provide samples ? is it free or extra ?
A7: Yes, we could offer the sample for free charge but do not pay the cost of freight.
